91短视频

Ordinary Double-column Vertical Lathe
  • Ordinary Double-column Vertical Lathe

Ordinary Double-column Vertical Lathe

Brand QIER WAJI CNC MACHINE

Product origin CHINA LIAONING

Delivery time 3 months

Supply capacity 2-5 units per month

1.Ordinary double-column vertical lathe is suitable for machining in various industries, and can be used for rough and fine turning of inner and outer cylindrical surfaces, conical surfaces, end faces and grooving.
2. The worktable of the Ordinary double-column vertical lathe adopts dynamic pressure guide rail, and the radial direction of the main shaft adopts NN30 double-row cylindrical roller bearings, so the worktable has a large bearing capacity and high rotation accuracy.
3. The machine tool electrical of Ordinary double-column vertical lathe adopts PLC control and is equipped with digital display device, which has higher reliability.
4.Ordinary double-column vertical lathe has beautiful appearance, good pleasantness and convenient operation.
5. Provide side tool holder and turning taper accessories according to special requirements.

Ordinary Double-column Vertical Lathe

Introduction of Ordinary double-column vertical lathe

Two-column vertical lathes are the main equipment for roughing and finishing.Its traditional structure makes the whole machine more compact and its traditionally mechanical transmission system makes it easier to operate, high versatility and convenient for maintenance. The machine can be installed with optional devices,such as DRO device, side railhead and others.

double-column vertical lathe

Double Column vertical Lathe D series2.5-4 meters

Double Column vertical Lathe D series2.5-4 meters

Product Model

颁(齿)5225顿×贬/奥

CX5231顿×贬/奥

CX5235顿×贬/奥

CX5240顿×贬/奥

Max.machining diameter(mm)

φ2500

φ3150

φ3500

φ4000

Max.height of workpiece (mm H×100)

H=16/20/25

H=16/20/25/31

H=16/20/25/31

H=16/20/25/31/36

Max.weight of workpiece(t)

W=10/20

W=10/20/32

W=10/20/32

W=10/20/32

Diameter of workbench(mm)

φ2250

φ2250/φ2830

φ2250/φ2830/φ3150

φ2830/φ3150/φ3600

Workbench rotate speed/steps

16

16/18

16/18

16/18

Workbench rotation speed limits(r/min)

2-63

2-63/1-50

2-63/1-50

2-63/1-50

Max.torque of workbench(KN.m)

63

63/80

63/80

63/80

Travel of crossbeam(mm)

1250/1650/2150

1250/1650/2150/2800

1250/1650/2150/2800

1250/1650/2150/2800/3250

Crossbeam lifting speed(mm/min)

350

350

350

350

Crossbeam lifting motor power(KW)

7.5

7.5

7.5

11

Horizontal stroke of  left/right vertical tool holder(mm)

(-15~1400)

(-15~1750)

(-15~1950)

-15~2150

Vertical stroke of  left/right vertical tool holder(mm)

1000/1250/1400/1600

1000/1250/1400/1600

1000/1250/1400/1600

1000/1250/1400/1600

Feed steps of tool holder

18

18

18

18

Feed limits of tool holder(r/min)

0.2-145

0.2-145

0.2-145

0.2-145

Rapid traverse speed of tool holder(mm/min)

1550

1550

1550

1550

Swivelling angle of  tool holder

±30°

±30°

±30°

±30°

Section of tool shank(mm)

40X50

40X50

40X50

40X50

Max.cutting force of right vertical tool holder(KN)

35

35

35

35

Max.cutting force of left vertical tool holder(KN)

28

28

28

28

Section of left/right ram(mm)

255X200

255X200

255X200

255X200

Ram form

"T" ram

"T" ram

"T" ram

"T" ram

Main motor power(KW)

55

55

55

55

Weight of lathe(appprox.)t

36/38/42

38/40/44/47

40/42/45/48

45/48/53/57

Vertical stroke of right tool holders' pentagonal turret(mm)

(1000/1250/1400)

(1000/1250/1400)

(1000/1250/1400)

(1000/1250/1400)

Max.machining diameter of side tool holder(mm)

Options(φ2300)




Horizontal stroke of side tool holder(mm)

Options(700)




Vertical stroke of side tool holder(mm)

Options(1200)




cutting force of side tool holder(KN)

Options(2800)




Workbench guideway forms

slide guide(W=10)
hydraulic guide(W=20)

slide guide(W=10)
hydraulic guide(W=20/32)

slide guide(W=10)
hydraulic guide(W=20/32)

slide guide(W=10)
hydraulic guide(W=20/32)

DRO control

Option

Option

Option

Option

Protective device

Option

Option

Option

Option

Coolant system

Option

Option

Option

Option

Servo stepless feeding

Option

Option

Option

Option

PLC

Option

Option

Option

Option


Ordinary double column D series5-6.3m):

Ordinary double column D series5-6.3m

Product number

CX5250顿×贬/奥

颁5250×贬/奥

颁5263×贬/奥

Maximum cutting diameter mm

φ5000

φ5000

φ6300

Maximum turning height mm (H×100)

H=20/25/31/36

H=31/36/40

H=31/36/40

Maximum workpiece weight t

W=(32/40)

W=50

W=50/80

Table diameter mm

φ3600/φ4000

φ4500

φ5000/φ5700(奥=80)

Table speed range r/min

1-50

0.5-50

0.5-50/0.32-32

Table speed series

18 grades/two grades stepless

stepless two

stepless two

Maximum torque of worktable KN.m

80

100

100/150(W=80)

Beam travel mm

1650/2150/2800/3250

2650/3100/3500

2650/3100/3500(W=80)

Beam lifting speed mm/min

350

310

310/300(W=80)

Beam lift motor power KW

18.5

18.5

18.5/30(W=80)

Horizontal stroke of left and right tool rests mm

(-15~2765)

(-20~2765)

(-20~3415)

Left and right tool rest vertical stroke mm

1250/1400/1600

1600

1600/2000(W=80)

Left and right tool post feed range r/min

0.2-145

1-500

1-500

Left and right tool post feed stages

18

stepless

Stepless

Rapid traverse speed of left and right tool rests mm/min

1550

3000

3000

Left and right tool post transfer angle range

±30°

(-15词30°)

(-15词30°)

Cross-sectional dimension of left and right tool rest rams mm

255X200

240X240

240X240/280X280(W=80)

Cross-section dimension of turning tool holder mm

40X50

50X50

50X50

Maximum cutting force of left vertical tool holder KN

28

35

35/50(W=80)

The maximum cutting force of the right vertical turret KN

35

50

50/63(W=80)

Left and right tool rest ram structure

"T" shaped ram

rectangular ram

rectangular ram

Main motor power KW

55

75

75/90(W=80)

Machine weight (approx.) t

68

100

120/160(W=80)

Workbench bearing guide rail structure

Hydrostatic guide

Hydrostatic guide

Hydrostatic guide

Digital display device

Options

Options

Options

Simple protective device

Options

Options

Options

cooling device

Options

Options

Options

Linear axis servo motor drive feed

Options

configure

configure

PLC control

Options

configure

configure

bullard vertical lathe

Other models of Ordinary double-column vertical lathe:

Ordinary double-column vertical lathe C(X)5226*16/10,Ordinary double-column vertical lathe C(X)5225,Ordinary double-column vertical lathe C(X)5231,Ordinary double-column vertical lathe C(X)5235,Ordinary double-column vertical lathe C5240,Ordinary double-column vertical lathe C5250,Ordinary double-column vertical lathe C5263,Ordinary double-column vertical lathe C5280,Ordinary double-column vertical lathe C52100


Application scope of Ordinary double-column vertical lathe

Automobile and motorcycle field, electrical equipment field, construction machinery field, military industry field, transportation, aerospace, education field, electronic product field


Ordinary double-column vertical lathe operation process should pay attention to:

1. The rough surface of the workpiece is not allowed to be placed directly on the work surface, and should be supported by a pad iron or a screw top; it is strictly forbidden to use the work surface for other operations such as calibrating the workpiece by hammering, welding the workpiece, etc.

2. When aligning the workpiece, you can only jog the worktable to rotate at a low speed for alignment, and high-speed alignment is not allowed.

3. When starting and stopping the workbench, the handle of the workbench can only be moved by hand, and pedals are strictly prohibited.

4. When the worktable is rotating, it is not allowed to do the lifting of the beam and the rapid movement of the tool rest.

5. When moving the beam, the clamping device must be released first, and it should be clamped immediately after the movement. After the beam is lowered each time, it should be raised a little to eliminate the clearance between the lead screw and the nut.

6. When performing interrupted cutting, appropriately reduce the amount of feed and the speed of the worktable.

7. The operating lever must be pushed to the specified position when shifting. If the gears are not meshed properly, they should be adjusted by inching after work, and forced operation is not allowed.


Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right